---
title: "Accessory Scanner Supported Integrations"
canonical: "https://docs.xirgoglobal.com/space/SD/486408330/Accessory+Scanner+Supported+Integrations"
format: markdown
---
| **Manufacturer** | **Model** | **Preset name** | **Supported parameters** | **Notes** |
| --- | --- | --- | --- | --- |
| [ELA](https://elainnovation.com/en/) | Blue PUCK T<br>Blue COIN T<br>Blue PUCK RHT | ELA Temperature | - Temperature | Instructions: Enter the full beacon name and select a sensor.<br>Note: Use beacons that advertise service data frame type.<br>Raw temperature value must be divided by 100 to get the correct float value. |
| Blue PUCK MAG<br>Blue COIN MAG | ELA MAG | - Status
- Counter | Instructions: Enter the full beacon name and select a sensor.<br>Counter value must be shifted to the right by 1 bit.<br>Note: Use beacons that advertise service data frame type. |
| Blue PUCK RHT | ELA RHT | - Temperature
- Humidity | Instructions: Enter the full beacon name and select a sensor.<br>Note: Use beacons that advertise service data frame type.<br>Raw temperature value must be divided by 100 to get the correct float value. |
| [Escort](https://wikien.fmeter.ru/index.php/Main_Page) | TD-BLE | Escort TD-BLE | - Fuel level (RAW)
- Battery voltage
- Temperature | Instructions: Enter the MAC address between the colon characters.<br>Battery voltage raw value must be divided by 10.<br>Note: Fuel level calculations must be done on the server side |
| [Eurosens](https://mechatronics.by/en/) | Degree BT | Eurosens Degree BT | - X angle
- Y angle
- Z angle
- Status
- Temperature | Instructions: Enter the MAC address between the colon characters. |
| Eurosens Degree BT Drum rotation mode | - Drum rotation speed
- Y angle
- Z angle
- Status
- Temperature
- Total drum rotation time
- Number of drum starts |
| Eurosens Degree BT Excavator mode | - X angle
- Y angle
- Z angle
- Status
- Temperature
- Status of operation
- Total time of operation |
| Dominator BT | Dominator BT sensors | - Battery charge
- Temperature (1 ° C / bit) (-40)
- % of fuel from a full tank
- Fuel volume
- Detector value | Instructions: Enter the MAC address between the colon characters. |
| [GiCAM](https://neomatica.com/en/equipment/) | BLE FLS | GiCAM FLS | - Fuel level (RAW)
- Remaining battery life in months
- Temperature | Instructions: Enter the MAC address between the colon characters.<br>Note: Read the manufacturer supplied documentation on how to interpret the raw fuel level value. |
| [Laird/Ezurio](https://www.ezurio.com/) | Sentrius BT510 | Laird Sentrius BT510 | - Temperature
- Magnet state
- Battery voltage
- Reset reason
- Flags | Instructions: Enter the MAC address of the sensor between the colon characters. Mac address also needs to be entered in the pattern match field with a different endianess. Do not change the last two characters as they are used to differentiate between the Bluetooth packets. Only change X1, X2, ...,  X6.<br>For example:  
Filter: E6:37:A5:27:FC:22  
Pattern match field: 22FC27A537E601 (for temperature filter) |
| [Technoton](https://jv-technoton.com/) | DUT-E S7 | DUT-E S7 | - Fuel frequency
- Temperature | Instructions: Enter the MAC address between the colon characters.<br>Temperature has an offset of "-50".<br>Fuel frequency raw value must be multiplied by 0.001.<br>Note: Calculations on the server side are needed to convert fuel frequency to fuel level. |
| [Teltonika](https://teltonika-iot-group.com/) | Eye beacon | Teltonika eye beacon (sensors + ID) | - Temperature
- Humidity
- Magnet status
- Magnet counter
- Pitch
- Roll
- Battery voltage | Instructions: Enter the MAC address between the colon characters.<br>Temperature raw value must be multiplied by 0.01.<br>Magnet status must be shifted by 7 bits to the right.<br>Battery voltage must be multiplied by 10 and 2000 offset is to be added.<br>Note: For this filter to work, all sensors on the Teltonika eye beacon must be turned on. “Teltonika eye beacon (sensors)” preset will not work when ID (Eddystone, iBeacon or Teltonika ID format) is advertised. |
| Teltonika eye beacon (sensors) |
| [TOPFLYtech](https://www.topflytech.com/en/) | TSDT1-B | TopFly DS | - Door status
- Alarm
- Temperature
- Battery voltage | Instructions: Enter the MAC address between the colon characters.<br>Temperature raw value must be multiplied by 0.01. |
| TSTH1-B | TopFly T&H | - Temperature
- Humidity
- Light sensor | Instructions: Enter the MAC address between the colon characters.<br>Temperature raw value must be multiplied by 0.01. |
| [Trak](https://www.trakfuel.com/) | Smart Fuel Cap | TrakfuelCap | - Detachment flag
- Unlock  flag
- Detachment event flag
- Attachment event flag
- Rotation event flag
- Coupling flag
- Battery percentage
- Temperature
- Lock byte
- Rotation byte | Instructions: Enter the MAC address between the colon characters. |
| [Xirgo](https://xirgo.com/) | XT10 | Xirgo XT10 (Door state) | - Door state | Instructions:  
Enter EUID in little-endian format in the pattern match field. Only change X1, X2, ...,  X6 values.<br>For example:  
EUID: E6:37:A5:27:FC:22  
Pattern match field: 22FC27A537E63C04 (for door state)<br>Door sensor state data must be shifted to the right by 6 bits. |

> ℹ️ Note: Presets, supported parameters and instructions are subject to change.