---
title: "Diagnostic trouble codes settings"
canonical: "https://docs.xirgoglobal.com/space/SD/27151709/Diagnostic+trouble+codes+settings"
format: markdown
---
Inside FMSet it's possible select which DTC mode to read - mode3, mode 7 or mode 10.  
And you can select onto which sensor your desired trouble code should be set.

|  |  |  |  |
| --- | --- | --- | --- |
| **Nr.** | **Sensor name** | **Type** | **Description** |
| 1. | Read DTC mode 3: | Setting | Select if you want to read this DTC mode |
| 2. | Store DTC mode 3: | Setting | Select where DTCs from mode above should be stored |
| 3. | Read DTC mode 7: | Sensor | Select if you want to read this DTC mode |
| 4. | Store DTC mode 7: | Sensor | Select where DTCs from mode above should be stored |
| 5. | Read DTC mode 10: | Sensor | Select if you want to read this DTC mode |
| 6. | Store DTC mode 10: | Sensor | Select where DTCs from mode above should be stored |
| 7. | Send Diagnostic Trouble Codes always | Sensor | If not selected device will read and send DTCs one time at the start of script. |
| 8. | Send Diagnostic Trouble Codes evry: | Sensor | Insert time how often DTCs should be sent, must be more than 0. |

![image](media://c18a0919-e91a-4fb9-9335-e27832770e7d)