---
title: "How to control Output’s with SMS/GPRS commands?"
canonical: "https://docs.xirgoglobal.com/space/RES/26411122/How+to+control+Output%E2%80%99s+with+SMS%2FGPRS+commands%3F"
format: markdown
---
There is a possibility to control the device OUTPUT with an SMS or GPRS command. 

Manual for settings configuration in order to control OUTPUT:

[FMS500 Series](https://docs.xirgoglobal.com/space/SD/27152103/Device+output+control)

[FMS500 SDK, XG3780/XG4780 series](https://docs.xirgoglobal.com/space/SD/27152103/Device+output+control)

### SMS command example: 

Output **activation**:  bestpassword S1=1

Output **deactivation**:  bestpassword S1=0

**note**: This example applies only if static signal 1 is selected. In case static signal 2 is used command should be: bestpassword S2=1 or bestpassword S2=0

### GPRS commands:

In order for the output to be controlled by a GPRS command, this functionality must be integrated into the software that You are using.

GPRS commands are explained in the device communication protocols:

[FMS500 Series communication protocol](https://docs.xirgoglobal.com/space/RES/26414581/Xirgo+Global+unique+protocol)

[FMS500 SDK, XG3780/XG4780 communication protocol](https://docs.xirgoglobal.com/space/RES/26411088/MQTT+communication+protocol)